From the brand
Product Description
The Perfect Solution for
Why choose JACKYLED LED Connectors?
This connector set for RGB LED light strips comes with easy-clasp connector clips and 90 degrees L shape PCB boards. You can attach them with your light strips directly without any tools or welding operations. The unwired design ensures a gapless layout when you need to turn your LED strips around sharp corners. They are compatible with both non-waterproof and waterproof 4-pin light strips.
Package Includes:
- 10 pcs L shape RGB sheets
- 22 pcs 4-pin connector clips
- 1 pcs LED clip opener
Important information
Wattage
72 watts
Bulb Voltage
12 volts
To report an issue with this product, click here.
Clubbby –
They work. They’re a good fit, and there’s decent tension between the contacts and the LED strip.I was hanging these LED strips from a ceiling, and I had the strip hanging and the weight of that was enough to make some of the contacts a bit loose. I just re-seated them shortly after starting putting up the next section and they’ve been fine since. I don’t fault the product for this. It’s some small pieces of metal relying on tension to stay in contact with some other small pieces of metal.If.. or more likely when I do something like this again, I’ll probably solder the connections once I know the fit is good.
Julius Freeman –
I installed LED strips along the molding near my ceiling & I needed connectors, as my room is 10′ x 14′. These connectors were simple to use, connected easily & 2 1/2 years later, they’re still firmly on my walls.Recommended
Amazon Customer –
Was easy to use to connect LED my 13 year old was able to do it himself. Great value for the cost!
Mayra –
Si funcionan pero los remplazos son muy delgados, parecen pedacitos de papel y con cualquier cosa se pueden romper.
Charlss –
very good article although so many of them are not necessary,
Kevin –
I bought these to link 2 straps of lights together. Works great and easy to install.
Jhojan Hernandez –
Don’t buy this unless you know how to use it
Damon –
Connectors work, but you may have to spend some time swapping out strips and connectors in order to get a current to go through.
Kiri J. –
Awesome
Awesome cheap and does the job
Makis –
Good connectors
I got these to avoid the loops at the corners of my TV and they worked perfectly.Pros:Can work as straight connectors as well if somebody wants to join two pieces of LED strip.Cons:The polarity signs can barely be seen.There isn’t any adhesive tape on the back (which in my case was not a big issue as my strip light had really good adhesion).
Clubbby –
They work. They’re a good fit, and there’s decent tension between the contacts and the LED strip.I was hanging these LED strips from a ceiling, and I had the strip hanging and the weight of that was enough to make some of the contacts a bit loose. I just re-seated them shortly after starting putting up the next section and they’ve been fine since. I don’t fault the product for this. It’s some small pieces of metal relying on tension to stay in contact with some other small pieces of metal.If.. or more likely when I do something like this again, I’ll probably solder the connections once I know the fit is good.
Julius Freeman –
I installed LED strips along the molding near my ceiling & I needed connectors, as my room is 10′ x 14′. These connectors were simple to use, connected easily & 2 1/2 years later, they’re still firmly on my walls.Recommended
Amazon Customer –
Was easy to use to connect LED my 13 year old was able to do it himself. Great value for the cost!
Mayra –
Si funcionan pero los remplazos son muy delgados, parecen pedacitos de papel y con cualquier cosa se pueden romper.
Charlss –
very good article although so many of them are not necessary,
Kevin –
I bought these to link 2 straps of lights together. Works great and easy to install.
Jhojan Hernandez –
Don’t buy this unless you know how to use it
Damon –
Connectors work, but you may have to spend some time swapping out strips and connectors in order to get a current to go through.
Kiri J. –
Awesome
Awesome cheap and does the job
Makis –
Good connectors
I got these to avoid the loops at the corners of my TV and they worked perfectly.Pros:Can work as straight connectors as well if somebody wants to join two pieces of LED strip.Cons:The polarity signs can barely be seen.There isn’t any adhesive tape on the back (which in my case was not a big issue as my strip light had really good adhesion).
Clubbby –
They work. They’re a good fit, and there’s decent tension between the contacts and the LED strip.I was hanging these LED strips from a ceiling, and I had the strip hanging and the weight of that was enough to make some of the contacts a bit loose. I just re-seated them shortly after starting putting up the next section and they’ve been fine since. I don’t fault the product for this. It’s some small pieces of metal relying on tension to stay in contact with some other small pieces of metal.If.. or more likely when I do something like this again, I’ll probably solder the connections once I know the fit is good.
Julius Freeman –
I installed LED strips along the molding near my ceiling & I needed connectors, as my room is 10′ x 14′. These connectors were simple to use, connected easily & 2 1/2 years later, they’re still firmly on my walls.Recommended
Amazon Customer –
Was easy to use to connect LED my 13 year old was able to do it himself. Great value for the cost!
Mayra –
Si funcionan pero los remplazos son muy delgados, parecen pedacitos de papel y con cualquier cosa se pueden romper.
Charlss –
very good article although so many of them are not necessary,
Kevin –
I bought these to link 2 straps of lights together. Works great and easy to install.
Jhojan Hernandez –
Don’t buy this unless you know how to use it
Damon –
Connectors work, but you may have to spend some time swapping out strips and connectors in order to get a current to go through.
Kiri J. –
Awesome
Awesome cheap and does the job
Makis –
Good connectors
I got these to avoid the loops at the corners of my TV and they worked perfectly.Pros:Can work as straight connectors as well if somebody wants to join two pieces of LED strip.Cons:The polarity signs can barely be seen.There isn’t any adhesive tape on the back (which in my case was not a big issue as my strip light had really good adhesion).